Skip to content
Home » Step-by-Step Guide: Easily Replace Tail Light on 2016 Chevy Colorado

Step-by-Step Guide: Easily Replace Tail Light on 2016 Chevy Colorado

How to Change Tail Light on 2016 Chevy Colorado

To change the tail light on a 2016 chevy colorado, follow these steps: remove the screws securing the tail light assembly, disconnect the wiring harness, and replace the faulty bulb. The tail light on a 2016 chevy colorado can easily be changed by following a few simple steps.

By removing the screws that secure the tail light assembly, you can then disconnect the wiring harness and replace the bulb. This process allows for a quick and efficient way to replace a faulty tail light on the 2016 chevy colorado.

Step-by-Step Guide: Easily Replace Tail Light on 2016 Chevy Colorado

Credit: www.wickedwarnings.com

What Tools You’Ll Need To Replace The Tail Light

Replacing the tail light on your 2016 chevy colorado is a relatively simple task that you can do yourself with just a few tools. Before you get started, gather the following items:

  • Screwdriver: A standard phillips-head screwdriver is typically all you need to remove the screws that secure the tail light assembly in place.
  • Replacement tail light: Make sure you have the correct replacement tail light for your specific chevy colorado model. You can find the right one at an auto parts store or online.
  • Gloves: It’s always a good idea to wear gloves when working on your vehicle to protect your hands from any sharp edges or debris.
  • Safety glasses: When handling the tail light assembly, wear safety glasses to protect your eyes from any potential debris or small particles.

Having these tools ready will ensure a smooth and hassle-free process as you replace the tail light on your 2016 chevy colorado. Now, let’s move on to the next steps to help you get the job done.

Safely Removing The Old Tail Light

Are you experiencing a burnt-out tail light on your 2016 chevy colorado? Well, don’t worry because changing it is easier than you think! In this guide, we will walk you through the process step by step, starting with safely removing the old tail light.

Follow the instructions below to get started:

Pop The Hood And Locate The Tail Light Assembly

  • To begin, open the hood of your chevy colorado and secure it in place.
  • Take a moment to locate the tail light assembly. Depending on the model year, it may be located on the rear corners of the vehicle.

Remove The Screws Holding The Tail Light In Place

  • Once you have located the tail light assembly, you will notice a few screws holding it in place. Use a screwdriver (or the appropriate tool) to remove these screws.
  • Set the screws aside in a safe place to avoid misplacing them.

Disconnect The Wiring Harness

  • With the screws removed, gently pull the tail light away from the vehicle.
  • Behind the tail light, you will find a wiring harness connected to it. Carefully disconnect the wiring harness by pressing the release tab and pulling it apart. Be cautious not to damage any wires during this process.

Remember, safety should always be a priority when working with any vehicle component. Here are a few extra tips to keep in mind:

  • Avoid directly touching the new tail light bulb with your bare hands. The oils from your skin can cause the bulb to burn out prematurely. If you accidentally touch the bulb, wipe it clean with rubbing alcohol before installation.
  • Before reattaching the new tail light, take a moment to inspect the area for any dirt or debris. Cleaning the surface will ensure a secure fit and optimal visibility.

Are you ready to continue the process and install the new tail light? Stay tuned for the next section of our guide, where we will walk you through the simple steps to install the new tail light on your 2016 chevy colorado.


Installing The Replacement Tail Light

Are you having issues with your 2016 chevy colorado’s tail light and need to replace it? Installing a replacement tail light is a relatively simple process that you can do yourself with just a few tools and a little bit of patience.

Follow the steps below to get your new tail light installed and working in no time.

Connect The Wiring Harness To The New Tail Light

Here are the key points to keep in mind when connecting the wiring harness to the new tail light:

  • Locate the wiring harness at the back of the old tail light and gently unplug it.
  • Take your new tail light and locate the corresponding connector on the back.
  • Align the connectors and push them together until they click into place.
  • Ensure that the connection is secure by giving it a gentle tug.

Align The New Tail Light And Insert The Screws

To align the new tail light and insert the screws, follow these steps:

  • Position the new tail light in the correct spot on the rear of your chevy colorado.
  • Make sure it lines up with the screw holes on the vehicle’s body.
  • Once aligned, insert the screws into the screw holes.
  • Do not fully tighten the screws just yet, as you may need to make minor adjustments to the alignment later.

Tighten The Screws Securely

To complete the installation of the replacement tail light, follow these guidelines:

  • Use a screwdriver or socket wrench to tighten the screws securely.
  • Ensure that each screw is tightened enough to hold the tail light in place, but be careful not to overtighten and risk damaging the tail light or the vehicle’s body.
  • Double-check the alignment of the tail light to make sure it is flush with the vehicle’s body.
  • If necessary, make any minor adjustments to the alignment before fully securing the screws.

Congratulations! You have successfully installed a replacement tail light on your 2016 chevy colorado. With just a few simple steps, you can enjoy a fully functional tail light that will keep you safe on the road. Remember, if you have any doubts or difficulties during the process, it’s always a good idea to consult your vehicle’s manual or seek professional assistance.

Checking If The Replacement Was Successful

After successfully changing the tail light on your 2016 chevy colorado, it’s important to check if the replacement was successful. Here are a few key points to keep in mind:

  • Turn on the headlights and check if the new tail light is working:
  • Ensure that both the new and existing tail lights are functioning properly.
  • Look for any flickering or dimness in the new tail light.
  • Confirm that the new tail light illuminates at the same brightness as the other side.
  • Test the brake lights:
  • Apply pressure to the brake pedal and observe if the new tail light illuminates.
  • Make sure the brake lights on both sides of the vehicle are working simultaneously.
  • Look for any discrepancies in brightness or responsiveness between the old and new tail lights.
  • Check the turn signals:
  • Activate the turn signals and ensure the new tail light is blinking in sync with the other lights.
  • Verify that the turn signal is not too fast or too slow, indicating a potential issue with the new tail light.
  • Test the reverse lights:
  • Engage the vehicle in reverse gear and see if the new tail light lights up.
  • Verify that the brightness and activation of the reverse lights are consistent between the old and new tail lights.

It’s important to conduct a thorough check to ensure the replacement was successful. In case there are any issues with the new tail light, consider revisiting the installation process or consulting a professional for further assistance. By following these steps, you can ensure the safety and functionality of your 2016 chevy colorado’s tail lights.

Finalizing The Installation Process

Now that you have successfully removed the old tail light and installed the new one, it’s time to finalize the installation process. Follow these steps to ensure everything is secure and in place on your 2016 chevy colorado.

Place The Tail Light Assembly Back Into Position

  • Position the tail light assembly carefully, aligning it with the screw holes on the vehicle’s body.
  • Make sure all the wiring and connectors are properly situated, ensuring a smooth fit.
  • Gently push the tail light assembly into place, ensuring it is snug and secure.

Secure It With The Screws

  • Take the screws that you removed earlier and insert them back into the screw holes.
  • Tighten each screw firmly, but be careful not to overtighten as it may damage the tail light assembly or the vehicle’s body.
  • Double-check that all the screws are properly secured and tightened.

Test The Tail Lights

  • Before finalizing the installation, it’s crucial to test your newly installed tail lights to ensure they are functioning correctly.
  • Turn on your vehicle’s ignition and switch on the headlights. Activate the tail lights to check if they are lighting up as expected.
  • Walk around your vehicle and verify that all the tail lights, including turn signals and brake lights, are functioning correctly.
  • If any issues are detected, double-check the wiring connections and make sure everything is properly aligned before securing it again.

By following these simple steps, you have successfully changed the tail light on your 2016 chevy colorado. Remember, it’s essential to practice caution and attention to detail during the entire process. If at any point you feel uncertain, it’s always wise to consult a professional mechanic.

With your newly installed tail lights, you can now enjoy a safe and well-illuminated ride.

Frequently Asked Questions Of How To Change Tail Light On 2016 Chevy Colorado

How Do You Change The Tail Light On A 2016 Chevy Colorado?

To change the tail light on a 2016 chevy colorado, follow these simple steps:

What Tools Do You Need To Change A Tail Light On A 2016 Chevy Colorado?

To change a tail light on a 2016 chevy colorado, you’ll need a screwdriver and replacement bulb.

Can I Change The Tail Light On My 2016 Chevy Colorado Myself?

Yes, you can change the tail light on your 2016 chevy colorado by following the step-by-step instructions.

Where Can I Buy A Replacement Tail Light For A 2016 Chevy Colorado?

You can buy a replacement tail light for your 2016 chevy colorado at an auto parts store or online.

How Long Does It Take To Change The Tail Light On A 2016 Chevy Colorado?

Changing the tail light on a 2016 chevy colorado should take approximately 10-15 minutes.

Conclusion

Changing the tail light on a 2016 chevy colorado is a simple task that can be done by following a few easy steps. First, gather the necessary tools such as a screwdriver and replacement bulbs. Then, remove the old tail light by unscrewing the mounting screws and disconnecting the wiring harness.

Next, replace the old bulb with a new one and reconnect the wiring harness. Finally, secure the new tail light in place by tightening the mounting screws. This process can be completed in a matter of minutes and does not require any special expertise.

By following these steps, you can ensure that your chevy colorado is equipped with functioning tail lights, promoting safety on the road. So go ahead and take that diy approach, confidently upgrading your vehicle and getting back on the road with full confidence in your new tail light repair skills.

Leave a Reply

Your email address will not be published. Required fields are marked *